Learn How To Setup Brother Wireless Printer

Printers are one of the important devices, whether you are in an office, organization, school, and nowadays in homes also. We need a printer to complete day to day work. But there are times when these devices fall under malfunctions and issues. The error can cause due to several reasons such as software conflicts, hardware fault, or improper installation and setup. This blog will provide you solutions to one of these issues. In this blog, we’ll discuss how to set up a brother wireless printer in a very easy manner. Usually, the wireless setup process is complex and complicated, and users find it hard to set up their devices. But with the Brother Wireless Printer Support team, the steps become easy and uncomplex. So follow this blog and learn the process to set up your brother wireless printer.

Before moving to the steps, please make sure that you have a working internet connection.

Write down the Wireless network name (SSID) and password and password of your router. 

Now follow the below-given steps and methods to set up your machine. 

Setup a Brother printer over a wireless network.

• Connect the power cord on your device and then connect it to the Power socket.
• Now turn your device to the on position.
• Go to the Control panel of your device and press the Menu button.
• Select the Network from the menu by pressing the Up and Down arrow key and then press OK.
• Navigate the option WLAN by pressing the Up and Down key and then press OK.
• Now again press the Up and down key to select Setup Wizard and press OK.
• Select Yes to enable the wireless network when you see the WLAN Enable option.
• This will start the wireless setup wizard.
• The machine will search and show the list of available network names (SSID)
• Now from the available list, select your Network SSID by pressing the Up and Down Key and then press enter.

Now select one of the following.

1. Authentication and encryption method that requires the Network Key (Password)
2. The authentication method is Open System and your encryption mode is None.

• Now the device will try to connect to the wireless network you have selected.
• The machine will indicate connected.
• The machine will print a wireless connection report.

If the machine did not print any test page/ report, that means there is any problem in the setup process. In that case, you need to contact the support team for detailed guidance and help. The support team is working all day and night at your help and support. Dial Configure Brother Printer Support Number +(1) -844-489-7268 toll-free.